Installation of double sunshade
Several installation methods of telescopic sunshadeMeasurement of a curved arm type sunshade: the width of the awning (hereinafter referred to as the width of the canopy) and the determination of three types of balcony measurements1, concave balcony first, with a balcony limit width measurement site (the size of the theoretical limit value of the awning can be installed). The width of the canopy is above the limit size and then subtracted from the 50mm (this size is the actual limit of the canopy that can be installed).2, semi recessed balcony first, with a balcony scene limit width measurement. The width of the canopy is above the size and then subtracted from the 50mm. This size is considered from the symmetrical angle of the awning. The actual size can be properly lengthened according to the customer's requirements, but the length of the lengthening must be calculated according to the width of the balcony and the position of the installation foot.3, open the balcony first, with a balcony scene limit width measurement. The width of the canopy is above the measured size. The actual size can be properly lengthened at both ends of the customer's request, but the length must be calculated according to the width of the balcony and the position of the installation foot.Two, the measurement of zenith sunshade: zenith sunshade is usually installed on outdoor sunlight house, according to the actual size of sunshine house and customer requirements. Lean on the roof of the sun room. If the sun room is flat, the slope can be properly given to the customer.Three, the measurement of window awning: the window awning is installed outside the window, which is divided into frame installation and frame installation. The actual size is determined according to the actual limit of the on-site awning and the customer requirements.Four, determine the operation mode and location: operation mode: handle operation and motor operation; operation direction: left side operation, right side operation and indoor operation; notice: confirm operation direction -- people always stand on the opposite side of the awning as a benchmark.
[More]
